VETERO KAMCHATKA
R290 air-to-water heat pumps, water up to 75 °C
Monobloc inverter R290 air-to-water heat pump with supply temperature up to 75 °C. Five modes (heating, cooling, DHW and their combinations), SG-Ready support.
Features
- R290 refrigerant (GWP 3), charge 0.55–1.4 kg
- Water temperature up to 75 °C
- Heating at −25…+30 °C, cooling at +16…+45 °C
- DC inverter compressor and fan, built-in inverter pump
- 5 operating modes, zone control
- SG-Ready, Wi‑Fi
- ErP A+++ (35 °C), IPX4
Specifications
| Model | Power supply | Heating A7/W35, kW | COP A7/W35 | Heating W55, kW | COP W55 | Cooling A35/W7, kW | Refrigerant, kg | Noise at 1 m, dB(A) | Water flow, m³/h | Dimensions, mm | Weight, kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KAMCHATKA 06, single-phase | 220–240/1/50 | 2.92–9.10 | 4.31–5.66 | 2.99–8.16 | 2.79–3.46 | 1.38–5.70 | R290/0.55 | 46 | 1 | 1187×418×805 (?) | 110 |
| KAMCHATKA 08, single-phase | 220–240/1/50 | 4.10–12.10 | 4.24–5.57 | 4.05–12.15 | 2.99–3.45 | 3.65–8.59 | R290/1.05 | 43 | 1.4 | 1287×448×904 (?) | 134 |
| KAMCHATKA 08, three-phase | 380–415/3/50 | 4.10–12.10 | 4.24–5.57 | 4.05–12.15 | 2.99–3.45 | 3.65–8.59 | R290/1.05 | 43 | 1.4 | 1287×448×904 (?) | 134 |
| KAMCHATKA 12, single-phase | 220–240/1/50 | 4.30–15.20 | 4.07–5.57 | 4.25–14.55 | 2.83–3.45 | 3.65–11.04 | R290/1.05 | 53 | 2.06 | 1287×448×904 (?) | 134 |
| KAMCHATKA 12, three-phase | 380–415/3/50 | 4.30–15.20 | 4.07–5.57 | 4.25–14.55 | 2.83–3.45 | 3.65–11.04 | R290/1.05 | 54 | 2.06 | 1287×448×904 (?) | 134 |
| KAMCHATKA 18, single-phase | 220–240/1/50 | 7.24–21.90 | 3.82–5.59 | 6.36–19.45 | 2.84–3.57 | 4.55–17.20 | R290/1.05 (?) | 56 | 2.06 (?) | 1187×488×1456 (?) | 195 |
| KAMCHATKA 18, three-phase | 380–415/3/50 | 7.24–21.90 | 3.82–5.59 | 6.36–19.45 | 2.84–3.57 | 4.55–17.20 | R290/1.4 | 56 | 3.1 | 1187×488×1456 (?) | 195 |
Manufacturer’s data. Actual performance depends on operating conditions; we select the exact model by calculation. A “?” means the manufacturer did not state the value or it needs to be confirmed.
More about the series on the manufacturer’s website.
Selection and supply
We calculate the building load, select the model, design the system, supply the equipment, install and maintain it. More on the page “R290 heat pumps”.
Other series
Contact us
Fill in the contact formFill in the contact form